PRESS RELEASE

 

20 December 2011

Lindab Pascal - a new simplified VAV solution with full potential

Lindab now launch the next generation of VAV system with the purpose of simplifying and optimizing all phases of the building construction from design to operation. This solution saves you for unnecessary energy use, regulation equipment in the ducts and a complicated installation. Lindab Pascal, the most simplified solution on the market with all you need for an optimized VAV system.

Lindab Pascal lower your energy use. Never before have energy use and indoor climate been this high on the agenda. The fact that energy use in the building sector accounts for more than 40% of Europe’s CO2consumption and that studies of modern office buildings shows that employees are only in their offices in 70% of their daily working hours gives every office building an increase demandfor a flexible indoor climate solution. Lindab Pascal has a demand control function that via a presence sensor can detect if there is any presence in the rooms and go to a low non-occupancy airflow level to optimize the energy consumption.

Lindab Pascal is a solution that makes it more simple to fulfil the needs for a well functioning VAV system. The solution is basically based on volume flow regulation which makes it a variable pressure system. Unlike constant pressure systems in the market today the duct layout is of less importance and the need for regulation equipment is less. With a variable pressure system it is possible to obtain correct airflows in all parts of the system and in all operating conditions. In the heart of the Pascal solution you will find the MBBV box. The MBBV box regulates each diffuser in the system to correct airflow. The unique linear cone damper technology of MBBV, which makes it possible to handle up to 200 Pa with low sound level, combined with an integrated actuator with precise flow measurement, eliminates the need for any other regulation equipment between the fan and the MBBV box. All components used in the solution are with standard settings from factory and can easily be adjusted and commissioned after installation. With only a few standard components, no special requirements for duct layout and a flexible system set up, Pascal makes designing, installation and commissioning so much easier.

The demand for VAV systems in modern construction is increasing and with good reason. VAV systems in general save a lot of the energy used for transportation and cooling of air. With the Pascal solution it is possible to lower the energy consumption even more. Instead of a traditional pressure regulation of the fan, the Pascal solution has a fan optimizer function that controls the fan speed of both supply and exhaust fan. The system makes sure thatat least one damper in the system is 85% open, which ensures that enough air is available in all parts of the system, but at the same time ensures that the fan does not provide more pressure than necessary. For optimal fan control Pascal reads all damper positions at room level.

Visit Lindab.com

Lindab Pascal simplifies construction...

Contacts:
Lindab Comfort
Anders G. Madsen
Email: anders.madsen@lindab.com
Tel. +45 73 23 26 80

 

About Lindab:

Lindab develops, manufactures, markets and distributes products and system solutions primarily in steel for simplified construction and improved indoor climate.

The business is carried out within three business areas, Ventilation, Building Components and Building Systems. The products are characterised by their high quality, ease of assembly, energy efficiency, consideration towards the environment, and are delivered with high levels of service. Altogether, this increases customer value.

The Group had net sales of SEK 7,019 m in 2009, was established in 31 countries and had approximately 4,500 employees. The main market is non-residential construction, which accounts for 80 percent of sales, while residential accounts for 20 percent of sales. During 2009, the Nordic market accounted for 42 percent, CEE/CIS (Central and Eastern Europe as well as other former Soviet states) for 21 percent, Western Europe for 32 percent and other markets for 5 percent of total sales.

The share is listed on the Nasdaq OMX Nordic Exchange, Stockholm, Large Cap, under the ticker symbol LIAB. The principal shareholders are Ratos, Sjätte AP-fonden and Skandia Liv. For more information visit www.lindabgroup.com

 

Description: LinLogo_C100M40_pos

Page 50

Stay Informed

Follow us on social media accounts to stay up to date with REHVA actualities

0

0 product in cart.products in cart.